User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Display Settings
- Chapter 4 Temperature Measurement
- Chapter 5 Picture and Video
- Chapter 6 Distance Detection
- Chapter 7 Connect Bluetooth
- Chapter 8 Set LED Light
- Chapter 9 Thermal View APP Connection
- Chapter 10 Maintenance
- Chapter 11 Appendix
9.2 Connect via Hot Spot
Before You Start
Download and install client
soware on your phone.
Steps
1. Go to Local
Sengs → Device Sengs → Wi-Fi Hotspot Sengs .
2. Tap
to enable WLAN hot spot funcon.
3. Tap Set Hot Spot to set the WLAN hot spot. The hot spot name and password display
automacally.
Figure 9-2 Set Hot Spot
4. Edit the hot spot name and password, show the keypad interface.
Note
DO NOT tap enter or space, and at least 8 characters, or the password may be incorrect.
5. Tap Close to hide the keypad.
6. Connect your phone to the WLAN Hot Spot of the device.
7. Launch the app and follow the startup wizard to create, and register an account.
8. Select Wi-Fi
conguraon in the soware, enter the serial number of device to add the device.
Refer to the manual of client soware for details.
Result
You can view the live view, capture snapshots, and record videos via the client.
Handheld Thermography Camera User Manual
32