User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Display Settings
- Chapter 4 Temperature Measurement
- Chapter 5 Picture and Video
- Chapter 6 Distance Detection
- Chapter 7 Connect Bluetooth
- Chapter 8 Set LED Light
- Chapter 9 Thermal View APP Connection
- Chapter 10 Maintenance
- Chapter 11 Appendix
Chapter 9 Thermal View APP Connecon
The device supports both Wi-Fi connecon and WLAN hot spot. Connect the device to Thermal
View client soware, and you can control the device via mobile client.
9.1 Connect via Wi-Fi
Before You Start
Download and install client
soware on your phone.
Steps
1. Go to Local Sengs → Device Sengs → Wi-Fi .
2. Tap to enable Wi-Fi, and the searched Wi-Fi will be listed as below.
Figure 9-1 Wi-Fi List
3. Select Wi-Fi and enter password to show the keypad interface.
Note
DO NOT tap enter or space, or the password may be incorrect.
4. Tap Close to hide the keypad.
5. Tap OK.
6. Launch the app and follow the startup wizard to create, and register an account.
7. Add the device to online devices.
Result
You can view the live view, capture snapshots, and record videos via the client.
Handheld Thermography Camera User Manual
31