User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Display Settings
- Chapter 4 Temperature Measurement
- Chapter 5 Picture and Video
- Chapter 6 Distance Detection
- Chapter 7 Connect Bluetooth
- Chapter 8 Set LED Light
- Chapter 9 Thermal View APP Connection
- Chapter 10 Maintenance
- Chapter 11 Appendix
2) Tap to add voice remarks. Hold to start recording and release the buon to stop
recording.
3) Tap to add thermography rules. Refer to Set Thermography Rule for details.
4) Tap
or pull the trigger to save the snapshot.
Note
You can also press to quit the saving.
8. Refer to Export Files to export the snapshots.
5.2 Scan QR Code
Device can scan and capture the QR code.
Steps
1. Press
in live view, and select ,.
2. Go to Capture Sengs, and enable QR Code.
3. Press to save and exit.
4. Aim the opcal lems at the QR code, and press the main trigger. Then a rectangle shows on the
screen and the device scans the QR code automacally.
5. Aer scanning the QR code successfully, press the main trigger again to capture and save the QR
code.
Note
Only supports scanning the QR code with up to 100 characters of text content.
5.3 Record Video
Before You Start
Go to Local Sengs → Capture Sengs → Flashlight to enable ashlight in dark environment.
Steps
1. In the live view interface, hold the trigger to start recording. The recording icon and count down
number display in the interface.
Handheld Thermography Camera User Manual
25