User's Manual

Chapter 5 Picture and Video
Insert memory card into the device, then you can record videos, capture snapshots, and mark and
save important data.
Note
• Device does not support capturing or recording when the menu is shown.
• When the device is connected to your PC, it does not support capturing or recording.
• Go to Local
Sengs → Device Sengs → Filename Header , you can set the lename header
for capturing or recording to disnguish the les recorded in a specify scene.
• Go to Local Sengs → Device Sengs → Device Inializaon to inialize the memory card is
needed.
5.1 Capture Picture
Before You Start
• Disable QR Code funcon rst.
• Go to Local Sengs → Capture Sengs → Flashlight to enable ashlight in dark environment.
Steps
1. Go to Local
Sengs → Capture Sengs .
2. Select Capture Mode to set the capture mode.
Single Capture Capture one picture for one me.
Connuous Capture Capture mulple pictures for one me. You can set the amount of
pictures.
Timed Capture Device captures one picture aer the specied me interval. You can
set the me interval as needed.
3. Select Picture Type to set the picture type.
Oine Picture Select this type when analyzing the picture with the client soware. You
can add remarks on the picture.
Thermal
Graphic
Select this type for custom soware development. Remark on the picture
is not allowed.
4. Oponal: Set the opcal resoluon as needed.
5. Press
to exit.
6. In the live view interface, pull the trigger to capture snapshot.
7. The live view freezes and device displays the capture eding interface.
1) Tap to add text remarks. Tap the screen to show the keypad interface, enter the comment
and
conrm.
Handheld Thermography Camera User Manual
24