User's Manual

Table 4-2 Icon Descripon
Icon Alarm Mode Descripon
Above Alarm Set the alarm temperature, and the device alarms
when target temperature is higher than rule
temperature.
Below Alarm Set the alarm temperature, and the device alarms
when target temperature is lower than rule
temperature.
Interval Alarm Set the alarm temperature secon (e.g., 90 °C to
150 °C), when target temperature is within the
secon (e.g., 100 °C), the device alarms.
Insulaon Alarm Set the alarm temperature secon (e.g., 90 °C to
120 °C), when target temperature is without the
secon (e.g., 70 °C or 125 °C), the device alarms.
3. Oponal: Press and to select between upper limit and lower limit.
4. Press
and to adjust the rule temperature.
5. Press to exit.
Note
Go to Local Sengs → Thermography Sengs → Alarm Sengs → Audible Warning to enable
audible warning. The device will sound when alarm is triggered.
Handheld Thermography Camera User Manual
23