User's Manual

4.3.1 Set Point Rule
You can set four types of point thermography rules.
Table 4-1 Icon Descripon
Icon Descripon
Center Point Thermography
High-temperature Point Thermography
Low-temperature Point Thermography
Custom Point Thermography
The seng method of center point, high-temperature, and low-temperature point thermography
are all the same. Here is the example of
seng high-temperature point thermography.
Example
Tap on the interface, the device locates the point of the highest temperature, and displays Max:
XX.
Custom Point Thermography
The device can detect the temperature of a custom point.
Steps
1. Select .
2. Press .
3. Move the point with the
navigaon buons or tap on the touch-screen to select a point.
4. Press .
The temperature of custom point (e.g. P1) displays P1: XX.
5. Repeat step 1 to 3 to set other custom points.
Note
At most ten custom points supported.
4.3.2 Set Line Rule
Steps
1. Select .
2. Press to generate a default line.
3. Press
, , , and to move the line up/down/le/right.
4. Drag points of the line on the touch-screen to extend or shorten the line.
Handheld Thermography Camera User Manual
21