User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Display Settings
- Chapter 4 Temperature Measurement
- Chapter 5 Picture and Video
- Chapter 6 Distance Detection
- Chapter 7 Connect Bluetooth
- Chapter 8 Set LED Light
- Chapter 9 Thermal View APP Connection
- Chapter 10 Maintenance
- Chapter 11 Appendix
The target is colored as heated iron.
Red Hot
The hot part is red-colored in view.
Fusion
The hot part is yellow-colored and the cold part is purple-colored in view.
Rain
The hot part in the image are colored, and the else is blue.
3. Press to exit the seng interface.
Note
You can also press on the live view interface to change the palees.
3.5 Adjust Digital Zoom
In the live view interface, press to adjust the digital zoom to 1×, 2×, 4×, or 8×. Then you can
view the target or scene in larger size.
3.6 Display OSD Info
Go to Local Sengs → Image Sengs → Display Sengs to enable the corresponding icons. Then
you can view the device status, me, and target emissivity in live view interface.
Handheld Thermography Camera User Manual
18