User's Manual

3.3 Set Display Mode
You can set the thermal/opcal view of the device. Thermal, Fusion, PIP, and Opcal are
selectable.
Steps
1. Select from the main menu.
2. Tap on the icons to select a view mode.
In thermal mode, the device displays the thermal view.
In fusion mode, the device displays the combined view of thermal channel and opcal
channel.
In PiP (Picture in Picture) mode, the device displays thermal view inside the opcal view.
Note
You can press and to set the PiP proporon. Or go to Local Sengs → Image Sengs →
PIP Proporon to set the value.
In opcal mode, the device displays the opcal view.
3. Press to exit.
3.4 Set Palees
The palees allow you to select the desired colors.
Steps
1. Select
from the main menu.
2. Tap on the icons to select a palee type.
White Hot
The hot part is light-colored in view.
Black Hot
The hot part is black-colored in view.
Rainbow
The target displays
mulple colors, it is suitable for scene without obvious temperature
dierence.
Ironbow
Handheld Thermography Camera User Manual
17