User's Manual

Steps
1. Press
in live view.
2. Select , and go to Capture Sengs → Laser Auxiliary Focus .
3. In the live view interface, aim the cursor at the target and hold the auto focus trigger. Release
the trigger to nish focus.
Note
DO NOT adjust the focus ring in this mode, or it will interrupt the focus process.
3.1.3 Semi-auto Focus
The device focuses automacally by comparing the brightness, contrast, etc. in current scene.
Note
• Disable auto focus mode and laser auxiliary focus mode rst.
• DO NOT adjust the focus ring in this mode, or it will interrupt the focus process.
In the live view interface, aim the cursor at the target and hold the auto focus trigger. Release the
trigger to nish focusing.
3.1.4 Auto Focus
In auto focus mode, the device focuses on the target automacally to make the scene clear. Use
this mode when the device is
staonary.
Cauon
Disable auto focus mode when the device is moving, or it may aect the device funcon.
Press in live view, and select . Go to Capture Sengs → Auto Focus , and enable auto focus
mode. Then aim the device at the target, and the device focuses automacally.
Note
Focus ring adjustment does not take eect in auto focus mode.
3.2 Set Screen Brightness
Go to Local Sengs → Device Sengs → Display Brightness to set the screen brightness. It can be
set as Low, Medium, or High.
Handheld Thermography Camera User Manual
16