User's Manual

2.2 Mount Hand Strap
The upper part of the hand strap is aached to the camera by a buckle. There are two buckles on
both sides of the camera. The lower part of the hand strap is threaded through the hole at the
base of the camera.
Steps
1. Insert the upper part of the hand strap into the buckle.
Figure 2-3 Insert Upper Part of Hand Strap
2. Fit the buckle on the device and ghten the screw with the supplied wrench.
3. Thread the lower part of the hand strap through the hole at the base of the device. Secure the
hand strap with the hook-and-loop fastener.
Figure 2-4 Secure Lower Part of Hand Strap
Handheld Thermography Camera User Manual
7