User's Manual

Chapter 2 Preparaon
2.1 Charge Device
2.1.1 Charge Device via Charging Base
Steps
Note
Please charge the device with the cable and power adapter supplied by the manufacturer (or
according to the input voltage from the specicaons).
1. Hold the device, and press both baery lock catches of the device.
Figure 2-1 Remove Baery Base
2. Hold the lock catches, and draw the baery base to take out the baery.
3. Insert the baery into the charging base. You can see the charging status via the pilot lamp on
the charging base.
Handheld Thermography Camera User Manual
5