User's Manual

Handheld Thermography Camera User Manual

Chapter 5 Picture and Video

Insert memory card into the device, then you can record videos, capture snapshots, and mark and

save important data.

Note

● Device does not support capturing or recording when the menu is shown.

● When the device is connected to your PC, it does not support capturing or recording.

● Go to Local Settings → Device Settings → Filename Header, you can set the filename header

for capturing or recording to distinguish the files recorded in a specify scene.

Go to Local Settings → Device Settings → Device Initialization to initialize the memory card if

needed.

5.1 Capture Picture

Steps

1. Go to Local Settings → Capture Settings.

2. Select Capture Mode to set the capture mode.

Single Capture

Capture one picture for one time.

Continuous Capture

Capture multiple pictures for one time. You can set the amount of

pictures.

Timed Capture

Device captures one picture after the specified time interval. You can

set the time interval as needed.

3. Select Picture Type to set the picture type.

Offline Picture

Select this type when analyzing the picture with the client software.

You can add remarks on the picture.

Thermal Graphic

Select this type for custom software development. Remark on the

picture is not allowed.

4. Optional: You can enable flashlight to get clear pictures in dark environment.

5. Optional: Set the optical resolution as needed.

6. Press to exit.

7. In the live view interface, pull the trigger to capture snapshot.