User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Display Settings
- Chapter 4 Temperature Measurement
- Chapter 5 Route Inspection
- Chapter 6 Picture and Video
- Chapter 7 Distance Detection
- Chapter 8 Geographic Location Display
- Chapter 9 Direction Display
- Chapter 10 Connect Bluetooth
- Chapter 11 Set LED Light
- Chapter 12 Cast Device Screen to PC
- Chapter 13 Connect Device to Wi-Fi
- Chapter 14 Set Device Hotspot
- Chapter 15 Thermal View Mobile Client Connection
- Chapter 16 Image Local Output
- Chapter 17 Maintenance
- Chapter 18 Appendix
●
The lithium baery voltage is 3.6 V, and the baery capacity is 6700 mAh.
●
The baery is cered by UL2054.
Maintenance
●
If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●
A few device components (e.g., electrolyc capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
●
Wipe the device gently with a clean cloth and a small quanty of ethanol, if necessary.
●
If the equipment is used in a manner not specied by the manufacturer, the protecon provided
by the device may be impaired.
●
We recommend you send the device back for calibraon once a year, and please contact the
local dealer for the informaon on maintenance points.
●
Please noce that the current limit of USB 3.0 PowerShare port may vary with the PC brand,
which is likely to result in incompability issue. Therefore it’s advised to use regular USB 3.0 or
USB 2.0 port if the USB device fails to be recognized by PC via USB 3.0 PowerShare port.
Using Environment
●
Make sure the running environment meets the requirement of the device. The operang
temperature shall be -10°C to 50°C (14°F to 122°F), and the operang humidity shall be 90% or
less.
●
DO NOT expose the device to high electromagnec radiaon or dusty environments.
●
DO NO
T aim the lens at the sun or any other bright light.
Technical Support
The
hps://www.hikmicrotech.com portal will help you as a HIKMICRO customer to get the most
out of y
our HIKMICRO products. The portal gives you access to our support team, soware and
documentaon, service contacts, etc.
Emergency
●
If smok
e, odor, or noise arises from the device, immediately turn o the power, unplug the
power cable, and contact the service center.
Laser Light Supplement Warning
Warning: The laser radiaon emied from the device can cause eye injuries, burning of skin or
inammable substances. Prevent eyes from direct laser. Before enabling the Light Supplement
funcon, make sure no human or inammable substances are in front of the laser lens. The wave
leng
th is 650 nm, and the power is less than 1 mW. The laser meets the IEC60825-1:2014 standard.
Handheld Thermal Camera G Series User Manual
ix










