Use and Care Manual

If you wish to retain the golden-brown color of new teak furniture, you should use a teak
wood sealer or wood oil after you have cleaned the surface of any dirt and debris. Apply the
sealer with a spray bottle, brush, or rag and let it dry for one hour. Then, proceed to apply a
second coat.
For continuous protection, it is recommended that you apply once per year.
Don’t use a pressure washer on teak furniture.
Don’t use stiff or wire brush, or steel wool.
This may remove the softer part of the grain, and leave unwanted textured surface, and steel
may stain the teak with rust spots.
Don’t use bleach as this will discolour the timber.
ROPE
The classic emblem of texture and strength is what you get to see with our
diverse range of rope garden furniture. It only requires minimal maintenance and no special
care whatsoever which means that it can be left outside to bask in the sun or battle harsh
weather conditions all year long.
One of the best ways to keep outdoor rope looking good and to delay deep or vigorous
cleaning is to properly maintain by brushing off any dirt before it becomes embedded, wiping
up spills as soon as they occur and spot cleaning soon after stains occur.
FABRICS
Higreen Outdoor uses Sunbrella® fabric and other quality acrylic fabric as cushion cover
material ,which are both designed to protect and last for years.
One of the best ways to keep Sunbrella® fabrics looking good is to brush off dirt before it
becomes embedded in the fabrics and wipe up spills or clean soon after a stain occurs. The
quicker you clean spills and stains, the easier they can be to remove.
Please refer to following Sunbrella® care and cleaning tips below for more detail.
Cushion Assembly
Step 1
Step 2
Step 3
Step 4
Unzip the back cushion
cover.
Put the cushion into the
back cushion cover .
Adjust as necessary for
a tight and smooth fit.
Zip up the cushion
cover.
Step 1 Step 2
Step 3
Step 4
Get the seat cushion
cover ready.
Attach the cover
to the FRONT of the
cushion first by lining up
the hook-and-loop strip.
Work the cushion cover
one side at a time,
pressing cover to cushion
to secure in place.
Adjust as necessary for
a tight and smooth fit.