SSD7505 4x M.2 Port to PCIe 4.0x16 NVMe RAID Controller SSD7505 Quick Installation Guide V1.
System Requirements PC Requirements System with a free PCIe 4.0 x16 or PCIe3.0 x16 slot Windows 10 , Windows Server 2016 and Windows Server 2019 Linux kernel 3.10 and later macOS 10.
SSD7505 Hardware Installation: Step 1. On the rear of the SSD7505, remove the six screws that secure the unit’s heat sink to the PCB. After removing the screws, carefully remove the heat sink from the SSD7505. Step 2. These 4 screws are used to install the NVMe SSD’s.
Step 3. Please remove the screws on the right side of SSD7505 Step 4. Gently insert the SSD into the slot. Step 5. Refasten the screw to secure the SSD. Repeat Steps 3 to 5 to install the remaining SSD.
Step 6. Replace the heat sink after installing all SSDs Step 7. On the rear of the SSD7505, refasten the 6 screws that were removed in step 1. Resources A variety of manuals, guides and FAQ’s are available for the SSD7505 RAID controller. In addition, we recommend visiting the Software Downloads webpage for the latest drivers, management interfaces, and installation guides. Software Download: SSD7505 Driver, WebGUI, Installation Guides https://highpoint-tech.com/USA_new/series-ssd7500-download.
Other Reference Information: Mother Board & NVMe SSD Compatibility List SSD7505 User Guides https://highpoint-tech.com/USA_new/series-ssd7500-resource.
Customer Support If you encounter any problems while utilizing the SSD7505 drive, or have any questions about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department. Web Support: https://www.highpoint-tech.com/websupport/main.php HighPoint Technologies, Inc. websites: https://www.highpoint-tech.com © Copyright 2020 HighPoint Technologies, Inc. All rights reserved.
