RocketU 1022A/ RocketU Dual USB 3.0 for Mac Host Controller Quick Installation Guide V1.
Content HighPoint RocketU 1022A/RocketU Dual USB 3.0 for Mac – PCI‐Express 2.0 ................. 3 Installing the RU Series Host Adapter ............................................................................ 4 Driver Installation (Microsoft Windows) ........................................................................ 4 RocketU 1022A .............................................................................................................. 4 RocketU Dual USB 3.0 for Mac .........................
HighPoint RocketU 1022A/RocketU Dual USB 3.0 for Mac – PCI‐Express 2.0 USB 3.0 Introduction USB 3.0’s Super‐Speed interface represents the next revolution in I/O interconnectivity standards. The 5Gb/s throughput is 10 times faster than USB 2.0, and delivers the bandwidth required by today’s fastest external drives. HighPoint RocketU 1022A/RocketU Dual USB 3.0 for Mac The RocketU 1022A/RocketU Dual USB 3.0 for Mac is an external, 2‐port Super‐Speed USB 3.0 PCI‐Express 2.0 x1 host storage controller.
Installing the RU Series Host Adapter Note: Make sure the system is powered‐off before installing the RU series host adapter. 1. Open the system chassis and locate an unused PCI‐Express (2.0 or 1.0) ×1(×4, ×8, ×16) slot. 2. Remove the PCI‐Express slot cover. 3. Gently insert the RU series into the PCI‐Express slot, and secure the bracket to the system chassis. 4. After installing the adapter, attach the hard disks or disk enclosure to the RU series card using the USB cables. 5.
8. 9. 10. Select the 'Driver' tab Select the 'Driver Details' button The follow file should be displayed, then installation was successful: ‐'system32\DRIVERS\asmtxhci.sys' Vista, Server 2008 and Win7 RocketU Dual USB 3.0 for Mac Once you have installed the RocketU Dual USB 3.0 for Mac Card and booted your Mac, follow these instructions to install the drivers and the HighPoint Web Manager software: 1) 2) Insert the RocketU Dual USB 3.
Connecting USB Storage Devices 1. 2. 3. Make sure your computer is operational. Connect the enclosure or hard disk to the HighPoint RocketU HBA with USB 3.0 cables. Allow the drives/enclosure to spin up for a few moments. Once the devices are ready, they will be recognized by the operating system and can be accessed as needed. Kit contents RocketU 1022A/RocketU Dual USB 3.
Customer Support If you encounter any problems while utilizing the RocketU series host adapter, or have any questions about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department. Web Support: http://www.highpoint‐tech.com/websupport/ HighPoint Technologies, Inc. websites: http://www.highpoint‐tech.com http://www.hptmac.
FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
