User`s guide

RocketRAID BIOS Utility
You will be asked to enter the Supervisor password.
The default password is “hpt”.
15
Logging In
The BIOS Utility has two interface modes: User and Supervisor
The User mode can only view information about the RocketRAID card, disks and
arrays.
The Supervisor mode is used to create/delete arrays, and configure RocketRAID
related settings. Supervisor mode requires a password – this is the same password
that you will need in order to use the Web Management interface.
Press F10 – this should bring you to the “System” toolbar command. Press Enter.
To log on as a User, use the arrow keys to highlight “User mode”, and press Enter.
To log on as Supervisor, select “Supervisor Mode”:, and press Enter.