User`s guide

42
6 - Web GUI - Recovering an Array
When a redundant array’s status is ”Critical”, fault tolerance is disabled. The array is can be used in this
format, but should be rebuild as soon as possible. If a Spare disk was configured, the RocketRAID 2700
will use this disk to automatically rebuild the array. If a spare is not available, the array can be rebuilt
manually.
If Auto-Rebuild is enabled, simply install a new disk – the RocketRAID 2700 will initialize the drive, and
initiate the rebuild process. If the setting is not enabled, follow the steps below.
To Rebuild an array:
1) Click “Maintenance” towards the right of the target array.