User`s guide

8. Reboot the system when prompted. The RocketRAID host adapter will be ready for use after Windows

reboots.

Installing the driver during a fresh Windows 7, 2008, Vista installation

1. Boot from the Windows Installation DVD.

2. When the screen “where do you want to install Windows” appears, click “Load

driver” and browse for the driver location. Windows can install drivers from

several media types: floppy diskette, USB flash disk or CD.

3. Select the RocketRAID 2700 controller driver, and click “Next”.

4. The driver is now installed – the disk or array will be recognized as available disk space. Windows setup

will then proceed normally.