User`s guide

RocketRAID 2640X1 BIOS Utility
3-7
6. The utility will display a progress bar during the flash procedure, then will attempt
7. Once complete, the system can be rebooted.
5 - BIOS – Additional Settings
The RocketRAID host adapter’s BIOS utility has several other configurable settings
that can be accessed when flashing the BIOS.
Using the hptflash.exe utility (from within a Windows operating system):
Click on the “Configure” button from the main interface window.
The following window will appear:
Use the drop down menus to enable or disable controller functions.
Using the DOS mode utility (load.exe):
Load xxx.xxx –c
Note: “xxx.xxx” refers to the BIOS image file.
A BIOS menu similar to the BIOS setup utility will be displayed.
This sub-menu allows the administrator to enable/disable various controller
functions.