User Manual

1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the system you want to delete.
3. Click the “Delete” button on the toolbar or select the “Delete” command from
the “Operation” menu.
4. A warning message will be displayed. Click “Yes” to delete the item. Select No
to cancel this command.
Connect to a Remote System
This command establishes a connection to a remote system for RAID management.
To connect to a remote system:
1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the remote system you to establish a connection with.
3. Click the “Connect” button on the toolbar or select the “Connect” command from
the “Operation” menu.
4. Enter the appropriate Login information in the pop-up window.
Note: The initial user name/password for a remote system is RAID/hpt. You are free
to modify the username and password after the connection is established.
RocketRAID 2240 Driver and Software Installation
4-22