User Manual

3 - Installing the RocketRAID 2240 Host Adapter
Note: Make sure the system is powered-off before installing the RocketRAID 2240
host adapter.
1. Open the system chassis and locate an unused PCI-X slot.
2. Remove the PCI slot cover.
3. Gently insert the RocketRAID 2240 into the PCI slot, and secure the bracket to
the system chassis.
RocketRAID 2240 Hardware Description/Installation
2-3
4. After installing the adapter, attach the Infiniband connectors to the RR2240’s
Infiniband ports, and to chassis backplane. Each Infiniband cable supports up
to 4 hard disk drives. Consult the chassis’s manual for proper installation
procedures.
5. Close and secure the system chassis.