Network Card User Manual

Congratulations

• BIOS booting support

• BIOS PnP and BBS (BIOS boot specification)support

• Write through and write back cache

• Online array roaming

• Online capacity expansion (OCE) and Online RAID level migration (ORLM)

• Quick and Background initialization for instant RAID configuration

• Automatic RAID rebuild

• 64bit LBA support greater than 2TB per volume

• S.M.A.R.T monitoring hard drive status for reliability

• Staggered Drive Spinup

• (MAID) spin down drives in array when idle

• ATA pass-through mode support

• Firmware update while running the Operating System

Array Monitors, Alerts and Indicators

• SMTP for email notification

• Alarm / Buzzer alerts for drive failure

• SAF-TE (I2C) and SGPIO enclosure management

• SNMP for remote management

• Ethernet port for (OBM) Out of Band Management

• NTP (Network Time Protocol)

• Intelli-VRM. (Intelligent Virtual RAID Management)

• SHI – Storage Health Inspector (S.M.A.R.T. and disk maintenance)

HighPoint RAID Management ( HRM )

• Hot key (ctrl-h) boot-up RAID manager via BIOS

• Web browser-base RAID management software

• Command Line Interface (CLI)

• API library for customizing AP