Network Card User Manual

Device Driver CD and HighPoint RAID Management

Red Hat Enterprise/CentOS, Fedora Core, Open SuSE – Installing

the Web-based Management utility

Linux operating systems that support .rpm packages, allow you to double-click the

HighPoint Web RAID Management .rpm file to start the installation process.

1. Copy the Web RAID Management package from the RR3530/3540 Software CD,

to the desktop of the Linux operating system. The .rpm file is located in

HighPoint RAID Management Software – WebGUI – RR3xxx_4xxx_OBM –

Inband_service – Linux

2. Browse to the appropriate .rpm file (there are 32 and 64-bit options).

3. Double click the .rpm file – this should open the operating systems software

installer. Enter the Administrative password when prompted and proceed with

installation.

4. The package can also be installed manually, using a terminal. Log on in as “root”,

open a terminal, and browse to the location of the .rpm file. Run the following

command:

5. # rpm -i hptsvr-https-1.4-8.i386.rpm (or hptsvr-https-1.4-8.x86_64.rpm)

Note: The i386 rpm package can also work on 64-bit systems if you have 32-bit

runtime libraries installed. If you use the x86_64 rpm package, please make sure the

controller driver has 64-bit ioctl support.-