Network Card User Manual

RocketRAID BIOS Utility
You will be asked to enter the Supervisor password.
The default password is “hpt”.
15
Logging In
The BIOS Utility has two interface modes: User and Supervisor
The User mode can only view information about the RocketRAID card, disks and
arrays.
The Supervisor mode is used to create/delete arrays, and configure RocketRAID
related settings. Supervisor mode requires a password – this is the same password
that you will need in order to use the Web Management interface.
Press F10 – this should bring you to the “System” toolbar command. Press Enter.
To log on as a User, use the arrow keys to highlight “User mode”, and press Enter.
To log on as Supervisor, select “Supervisor Mode”:, and press Enter.