Owner Manual (White)

ASSEMBLY INSTRUCTION
NOTE: Please consult a qualified electrician if you are not certain of the installation.
CAUTION: Before starting the installation, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
1. Fasten Nipple to Mounting Strap by screwing Hex Nut and adjust desired length.
2. Fasten Mounting Strap onto Outlet Box using 2 Outlet Box Screws.
3. Connect wires with white to white and black to black, cover the connections by using the Wire Connectors
provided. Tie the ground wire from Outlet Box and from fixture to the Ground Screw on the Mounting
Strap.
4. Place the Ceiling Plate against the ceiling allowing the Nipple to pass through the center hole of the
Ceiling Plate, and secure the Ceiling Plate with Pipe Nut.
5. Install bulb (Included).
6. Fasten the Glass Shade and Metal Shade onto the Ceiling Plate by using the Lock Screws provided.
7. Turn on the power.

Summary of content (2 pages)