Assembly Instructions

Step 1
Step 2
Position the Chair on its back as shown.(Perferrably on a surface that
won't scratch the upholstery.)Open the inner box and take out the 4
wooden legs provided.
Install the Front Leg(C) and Back Leg(Left&Right) into the bottom of
theChair Base Body(B) by placing a Washer Ring (①)Bolt(②)Spring
WasherRing(③)Flat Washer Ring(④) with Allen Key(⑤)onto the threaded
stem.And then insert the threaded Stem into the threaded Mounting
Position ateach Corner of the Bottom of the Chair.
Note:The use of Washer Rings are OPTIONAL and is especially useful
tohelp alleviate slight wobbleness.Some legs may need more than
onWasher Ring whilst some legs may not need any.
Page 3 OF 6