Use and Care Manual

3
2. Close the battery compartment by inserting
cover and clicking back into place.
3. Push the red “TEST” button to make sure
unit is working properly. If you don’t hear the
sonic blast, check to make sure battery con-
nectors are properly positioned.
4. Place Transmitter in restricted area. You can
screw or velcro to a surface, or tie to a stake
or fence. 1 to 2 feet off the ground is a good
starting point.
5. Adjust the “RANGE” knob to the desired
distance. “0” is off; “1” through “10” produce
increasingly longer trigger ranges. Experi-
ment by holding the collar by the strap and
moving toward the YARD BARRIER.
6. Place collar on pet, making sure the t is
snug, but not too tight and cut off excess
collar length, leaving enough so that collar
strap is not too short to place collar on and
remove collar from pet’s neck comfortably.