User Manual

BILL COUNTER

COUNTING FUNCTION

2) ‘ADD’ Function

The ‘ADD’ function can be performed by pressing the ‘ADD’ button. When the

‘ADD’ indicator is on, remove the counted bills from the stacker and start anoth-

er batch counting. The counting display will not show number from 1 and will be

added to the previous counted quantity. Press the ‘ADD’ button again to close

this function.

3) ‘BATCH’ Function

The ‘BATCH function can be performed by pressing the ‘BATCH’ button. When the

‘BATCH’ indicator is on, the ‘BATCH’ number will be set to 100. To adjust ‘BATCH’

number, press or hold the ‘+’ or ‘–‘ buttons to adjust by single digits, then release

when desired ‘BATCH’ number is reached.

NOTE: The ‘ADD’ function can be performed when the preset function is on. In

this case, the machine will stop automatically when its counting quantity reach-

es the preset value. When starting another batch counting, the counting display

will show the total counted sum that’s added from a previous counted quantity.