Technical Data

High Performance Cement by Quikrete
®
www.highperformancecement.com • [phone]
FastSet
™
Repair Mortar
FastSet
™
Repair Mortar
Product Description
High Performance Cement FastSet
™
Repair Mortar is a polymer
modified and shrinkage compensated rapid setting, high strength
repair material designed for vertical and overhead structural repairs to
concrete and masonry surfaces.
Product Use
FastSet
™
Repair Mortar demonstrates low sag, making it ideal for
vertical or overhead repairs. FastSet
™
Repair Mortar is also available
with integral corrosion inhibitor in cases where maximum corrosion
protection is desired. The addition of corrosion inhibitor has no adverse
effect on the other physical properties of the product.
This product can be built up to at least 1-1/2” (38 mm) in one
application. Its unique properties allow the user to actually sculpt
the material during application. Use to repair concrete cracks, curbs,
steps, pre-stressed panels, pipe, tunnels, sewers, loading docks, silos,
retaining walls, culverts, catch basins, decorative moldings, bridge
columns, parapet walls, septic tanks, cold storage vaults, virtually any vertical or overhead concrete surface.
Size
55 lb (25 kg) bags and 20 lb (9.1 Kg) pails.
Yield
Each 55 lb (25 kg) bag of FastSet
™
Repair Mortar will yield approximately 0.50 cu ft (14 L) of material. FastSet
™
Repair Mortar can be extended with up to 27.5 lb (12.5 kg) of -3/8” (-9.5 mm) (or -1/2” (-12.7 mm)) clean maximum
size aggregate per 55# bag for deep repairs.
Technical Data
APPLICABLE STANDARDS
ASTM International
• ASTM C109/C109M Standard Test Method for
Compressive Strength of Hydraulic Cement
Mortars (Using 2-in. or [50-mm] Cube Specimens)
• ASTM C157/C157M Standard Test Method for
Length Change of Hardened Hydraulic-Cement,
Mortar, and Concrete
• ASTM C191 Standard Test Methods for Time of
Setting of Hydraulic Cement by Vicat Needle
• ASTM C882 Standard Test Method for Bond
Strength of Epoxy-Resin Systems Used With
Concrete By Slant Shear
• ASTM C928 Standard Specification for Packaged,
Dry, Rapid-Hardening Cementitious Materials for
Concrete Repairs
PHYSICAL/CHEMICAL PROPERTIES
Typical test results for FastSet
™
Repair Mortar, when
tested in accordance with applicable ASTM Test
Methods, are shown in Table 1. Product exceeds the
requirements of ASTM C928 Type R2 with reduced
flow for vertical and overhead applications.
Division 3
03 01 00 Maintenance of Concrete
Product No. 1241-56 (bag)
Product No. 1241-26 (pail)