User Manual
HF-Z100 ZigBee Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -9-
2.5. Evaluation Kit
High-Flying provides the evaluation kit to promote user to familiar the product and develop the detailed
application. The evaluation kit shown as below, user can connect to HF-Z100 module with the UART
(USB), or SWD Debugger port to configure the parameters, manage the module or do the some
functional tests.
Figure 7. HF-Z100 Evaluation Kit
Notes:
User need consult high-flying for software SDK support or more detailed debug support.
The external interface description for evaluation kit as follows:
Table 5 HF-Z100 Evaluation Kit Interface D escription
Function
Name Description
External
Interface
JTAG JTAG data debug interface (Not for user use)
USB
UART to USB debug interface. (For PC without
RS232, need load driver). Can be Power input.
DC Jack
DC jack for power in, 5~9V input.
DC5-9V DC jack for power in, 5~9V input.
BAT
2 Li-Battery Power Supply.
EXT PORT HF-Z100 GPIO function extend interface connector
LED
Power 3.3V Power Indicator
TXD UART TXD Indicator
RXD UART TXD Indicator
Button
nReset Used to reset the module.