User Manual
HF-Z100 ZigBee Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -3-
1. PRODUCT OVERVIEW
1.1. General Description
The HF-Z100 is a fully self-contained, small form-factor, IEEE802.15.4 Zigbee modulewith low
complexity, self-organizing, lowpower, low cost feature.It is based on IEEE802.15.4 standard, can be
coordinated toachieve communication between the thousands of tiny sensors that require very
littleenergy to relay the data through radio waves from one sensor to another sensor, thus withhigh
communication efficiency.
The HF-Z100 employs the world's lowest power consumption embedded architecture. It has been
optimized for all kinds of Zigbee applications in the home automation, smart grid, smart lighting,
handheld device, personal medical application and industrial control that have lower data rates, and
transmit or receive data on an infrequent basis.
The HF-Z100 integrates all IEEE802.15.4 Zigbee functionality into a low-profile,15.6x12.2x2.0mmSMT
module package that can be easily mounted on main PCB with application specific circuits. Also,
module provides built-in antenna, external antenna option.
1.2. Device Features
Size: 15.6x12.2x2.0mm Smallest size module;
High RX sensitivity:
≤
-101dBm;
Excellent link budget: > 110dB;
Max output power: 9dBM +/- 1.5dBm;
Extend OperationTemprture: -40
℃
-110
℃
for smart lighting application;
Low power consumption:
Operating Current: < 150mA
Deep Sleep Current: <10uA
512KB Internal Flash, 160KB SRAM resource for customized application;
Full Zigbee ZHA/ZLL profile supported;
Various peripherals interface:
15 x GPIO ports
3 x 16-bit ADC input channel
2 x UART with hardware flow control
1 x SPI interface
1 x I2C interface
SWD debug interface
Power Supply Range from 2V to 3.6V, support battery supply application;
High performance on-board antenna and PAD/HOLE for external antenna option;
CE/FCC/RoHS certification;