User Manual

High-Flying
Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 10 -
1.1.2 Device Paremeters
Table 1 HF-LPB100 Module Technical Specifications
Class Item Parameters
Wireless
Parameters
Certification FCC/CE
Wireless standard 802.11 b/g/n
Frequency range 2.412GHz-2.484GHz
Transmit Power
802.11b: +16 +/-2dBm (@11Mbps)
802.11g: +14 +/-2dBm (@54Mbps)
802.11n: +13 +/-2dBm (@HT20, MCS7)
Receiver Sensitivity
802.11b: -93 dBm (@11Mbps ,CCK)
802.11g: -85 dBm (@54Mbps, OFDM)
802.11n: -82 dBm (@HT20, MCS7)
Antenna Option
External:I-PEX Connector
Internal:On-board PCB antenna
Hardware
Parameters
Data Interface
UART
SPI, PWM, GPIO
Operating Voltage 2.8~3.6V
Operating Current
Peak [Continuous TX]: ~200mA
Normal [WiFi ON/OFF, DTIM=100ms]:
Average. ~12mA, Peak: 200mA
Standby [WiFi Shutdown]: <200uA
Power Down Switch: <10uA
Operating Temp.
-40℃- 85℃
Storage Temp.
-45℃- 125℃
Dimensions and Size
23.1mm×32.8mm×2.7mm
Software
Parameters
Network Type STA /AP/STA+AP
Security Mechanisms WEP/WPA-PSK/WPA2-PSK
Encryption WEP64/WEP128/TKIP/AES
Update Firmware Local Wireless, Remote
Customization
Web Page Upgrade
Support SDK for application develop
Network Protocol IPv4, TCP/UDP/FTP/HTTP
User Configuration
AT+instruction set. Android/ iOS
Smart Link APP tools
1.1.3 Key Application
 Remote equipment monitoring
 Asset tracking and telemetry
 Security
 Industrial sensors and controls
 Home automation
 Medical devices
HF-SH01