User's Manual

HF-LPT220 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 25 -
3. OPERATION GUIDELINE
3.1. Configuration
When first use HF-LPT220 modules, user may need some configuration. User can connect to HF-
LPT220 module’s wireless interface with following default setting information and configure the module
through laptop.
Table 8 HF-LPT220 Web Access Default Setting
Parameters
Default Setting
SSID
HF-LPT220
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
3.2. Usage Introduction
3.2.1. Software Debug Tools
High-Flying use two common software tools debugging and applying HF-LPT220 module.
(User can also select other tools used to debug serial port).
 Serial Debugging Software: ComTools
 Ethernet Debugging Software: TCPUDPDbg
3.2.2. Network Connection
User can select two methods to connect HF-LPT220 module base on dedicated application.
 Use HF-LPT220 STA interface. HF-LPT220 and debug PC2 connect to a wireless AP,
another PC1 (or user device) connect to HF-LPT220 module with serial port:
Figure 11. STA Interface Debug Connection
 Use HF-LPT220 AP interface. Debug PC2 connect to HF-LPT220 through wireless
 connection, another PC1 (or user device) connect to HF-LPT220 module with serial port.