User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 49 -
 filename: the upgrade file name, it’s optional and not saved parameter. If provide
this file name here, the module will start upgrade right away;
4.2.2.54. AT+UPFILE
 Function: Set/ Query remote upgrade configure file name;
 Format:
 Query Operation
AT+UPFILE<CR>
+ok=<filename> <CR><LF><CR><LF>
 Set Operation
AT+UPFILE=<filename> <CR>
+ok<CR><LF><CR><LF>
 Parameters:
 filename: the upgrade configure file name (within 20 characters).
4.2.2.55. AT+LOGSW
 Function: Open/Close remote upgrade logfile
 Format:
 Query Operation
AT+LOGSW<CR>
+ok=<status><CR><LF><CR><LF>
 Set Operation
AT+LOGSW=<status><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 status:
 on: Open. The UART Port will print some upgrade status when upgrading. the
log file will be sent to UDP Port after successfully
 off: Close.
4.2.2.56. AT+LOGPORT
 Function: Set/Query remote upgrade UDP port of log file.
 Format:
 Query Operation
AT+LOGPORT<CR>
+ok=<port><CR><LF><CR><LF>
 Set Operatioin:
AT+LOGPORT =<port><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 port: The remote upgrade UDP port of log file.
4.2.2.57. AT+UPST
 Function: Start remote upgrade;
 Format: