User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 44 -
 OPEN
 SHARED
 WPAPSK
 WPA2PSK
 encry:Encryption algorithm
 NONE: When “auth=OPEN”, effective
 WEP: When “auth=OPEN” or “SHARED”, effective
 TKIP: When ”auth= WPAPSK” or “WPA2PSK”, effective
 AES: When “auth= WPAPSK” “WPA2PSK”, effective
 key: password, ASCII code, shall less than 64 bit and greater than 8bit
4.2.2.38. AT+WANN
 Function: Set/Query STA network setting. Setting is valid after reset.
 Format:
 Query Operation
AT+WANN<CR>
+ok=<mode,address,mask,gateway><CR><LF><CR><LF>
 Set Operation
AT+WANN=< mode,address,mask,gateway ><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 mode: STA’s IP network setting
 static: Static IP
 DHCP: Dynamic IP
 address: STA IP address;
 mask: STA subnet mask;
 gateway: STA gateway address;
4.2.2.39. AT+WSMAC
 Function: Set/Query STA MAC address parameters. Setting is valid after reset.
 Format:
 Query Operation
AT+WSMAC<CR>
+ok=<mac_address><CR><LF><CR><LF>
 Set Operation
AT+WSMAC=<code,mac_address><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 code: security code
 8888 (default value)
 Mac_address: STA MAC address, such as ACCF23FF1234
4.2.2.40. AT+WSLK
 Function: Query STA WiFi link status