User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 24 -
3. OPERATION GUIDELINE
3.1. Configuration via Web Accessing
When first use HF-LPT200 modules, user may need some configuration. User can connect to HF-
LPT200 module’s wireless interface with following default setting information and configure the module
through laptop.
Table 8 HF-LPT200 Web Access Default Setting
Parameters
Default Setting
SSID
HF-LPB100
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
User Name
Admin
Password
Admin
3.1.1. Open Web Management Interface
Step 1: Connect laptop to SSID “HF-LPT200” of HF-LPT200 module via wireless LAN card;
Step 2: After wireless connection OK. Open Wen browser and access “http://10.10.100.254”;
Step 3: Then input user name and password in the page as following and click “OK” button.
Figure 13. Open Web Management page
The web management interface is for upgrade module software.