User Manual

High-Flying
HF-LPT200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) - 10 -
1.1.2 Device Paremeters
Table 1 HF-LPT200 Module Technical Specifications
Class
Item
Parameters
Wireless
Parameters
Certification
FCC/CE
Wireless standard
802.11 b/g/n
Frequency range
2.412GHz-2.484GHz
Transmit Power
802.11b: +16 +/-2dBm (@11Mbps)
802.11g: +14 +/-2dBm (@54Mbps)
802.11n: +13 +/-2dBm (@HT20, MCS7)
Receiver Sensitivity
802.11b: -93 dBm (@11Mbps ,CCK)
802.11g: -85 dBm (@54Mbps, OFDM)
802.11n: -82 dBm (@HT20, MCS7)
Antenna Option
External: Pad interface
Internal:On-board Chip antenna
Hardware
Parameters
Data Interface
UART
SPI, GPIO
Operating Voltage
2.8~3.6V
Operating Current
Peak [Continuous TX]: ~200mA
Normal [WiFi ON/OFF, DTIM=100ms]:
Average. ~12mA, Peak: 200mA
Standby : <200uA(Reserved)
Operating Temp.
-40℃- 85℃
Storage Temp.
-45℃- 125℃
Dimensions and Size
22mm×13.5mm×3mm
Software
Parameters
Network Type
STA /AP/STA+AP
Security Mechanisms
WEP/WPA-PSK/WPA2-PSK
Encryption
WEP64/WEP128/TKIP/AES
Update Firmware
Local Wireless, Remote
Customization
Web Page Upgrade
Support SDK for application develop
Network Protocol
IPv4, TCP/UDP/FTP/HTTP
User Configuration
AT+instruction set. Android/ iOS
Smart Link APP tools
1.1.3 Key Application
 Remote equipment monitoring
 Asset tracking and telemetry
 Security
 Industrial sensors and controls
 Home automation
 Medical devices