User Manual

High-Flying
HF-LPB Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 30 -
User can access http://10.10.100.254 to set again, and user name and password is “admin”. HF-
LPT100 will restore to AP mode for factory default setting.
Figure 21. Restore Page
3.2. HF-LPT100 Usage Introduction
3.2.1. Software Debug Tools
High-Flying use two common software tools debugging and applying HF-LPT100 module.
(User can also select other tools used to debug serial port).
 Serial Debugging Software: ComTools
 Ethernet Debugging Software: TCPUDPDbg
3.2.2. Network Connection
User can select two methods to connect HF-LPT100 module base on dedicated application.
 Use HF-LPT100 STA interface. HF-LPT100 and debug PC2 connect to a wireless AP,
another PC1 (or user device) connect to HF-LPT100 module with serial port:
Figure 22. STA Interface Debug Connection
 Use HF-LPT100 AP interface. Debug PC2 connect to HF-LPT100 through wireless
connection, another PC1 (or user device) connect to HF-LPT100 module with serial port.