User's Manual

OEM Guidance
1. Applicable FCC rules
2. The specific operational use conditions
This module can be used in IoT devices. The input voltage to the module is
nominally 2.1~3.46V DC. The operational ambient temperature of the module is
–40 °C ~ 65 °C.
Only the embedded PCB antenna is allowed. Any other
external antenna is prohibited.
3. Lim
ited module procedures
N/A
4.
Trace antenna design
N/A
5. RF exposure considerations
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
m
inimum distance 20cm between the radiator and your body. If the equipment
built into a host as a portable usage, the additional RF exposure evaluation may
be required as specified by 2.1093.
6.
Antenna
Antenna type: PCB antenna Peak gain: 0dBi
7.
Label and compliance information
An exterior label on OEM’s end product can use wording such as the following:
“Contains Transmitter Module FCC ID: 2ACSVHF-LPD100” or
“Contains FCC ID: 2ACSVHF-LPD100.”
OEM Guidance
1. Applicable FCC rules
This module is granted by Single Modular Approval. It complies to
the requirements of FCC part 15.247 and 15.407