User Manual
HF-LPB200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 7 -
1. PRODUCT OVERVIEW
1.1. General Description
The HF-LPB200 is a fully self-contained small form-factor, single stream, 802.11b/g/n Wi-Fi module,
which provide a wireless interface to any equipment with a Serial/SPI/USB/GPIO interface for data
transfer.HF-LPB200 integrate MAC, baseband processor, RF transceiver with power amplifier in
hardware and all Wi-Fi protocol and configuration functionality and networking stack, in embedded
firmware to make a fully self-contained 802.11b/g/n Wi-Fi solution for a variety of applications.
HF-LPB200 support AP+STA wireless networking and support Wi-Fi Direct mode. HF-LPB200 also
provides wireless and remote firmware upgrade, which satisfied all kinds of application requirement.
HF-LPB200 support wakup-on-wireless feature which make it a very suitable solution for battery
applications with excellent power save scheme.
The HF-LPB200 employs the world's lowest power consumption embedded architecture. It has been
optimized for all kinds of client applications in the home automation, smart grid, handheld device,
personal medical application and industrial control that have lower data rates, and transmit or receive
data on an infrequent basis.
The HF-LPB200 integrates all Wi-Fi functionality into a low-profile, 23.1x32.8x 2.7mm SMT module
package that can be easily mounted on main PCB with application specific circuits. Also, module
provides built-in antenna, external antenna option.
1.1.1 Device Features
Single stream Wi-Fi @ 2.4 GHz with support for WEP security mode as well as WPA/WPA2
Fully self-contained serial-to-wireless functionality.
Support IEEE802.11b/g/n Wireless Standards
Ultra-Low-Power for Battery Applications with Excellent Power Save Scheme
Support UART/SPI/USB/PWM/ADC/GPIO Data Communication Interface
Support Work As STA/AP/AP+STA/Wi-Fi Direct Mode
Support Smart LinkTM Function (APP for smart configuration)
Support Wireless (OTA) and Remote Firmware Upgrade Function
Support Wakeup-on-Wireless and Wakeup Local
Support TLS/SSL and mDNS Protocal
Reserve More Than 512KB Flash and 128KB SRAM For User Defined Application
Single +3.3V Power Supply
Smallest Size: 23.1mm x 32.8mm x2.7mm
FCC/CE Certificated