User Manual

HF-LPB200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 52 -
 Query Operation
AT+ UPST<CR>
+ok=<log> <CR>< LF ><CR>< LF >
 Parameters:
 log: feedback the status of remote upgrade;
Note: After execute this command, the HF-LPB200 will automatic start upgrade base on the
setting of UPURL, UPFILE command contents;
5.2.2.41. AT+WEBU
 Function: Set/ Query webpage user name and password;
 Format:
 Query Operation
AT+ WEBU<CR>
+ok=<username,password> <CR>< LF ><CR>< LF >
 Set Operation
AT+ WEBU=<username,password><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 username: User Name, within 15 characters, not support empty.
 password: password, within 15 characters, support empty.
5.2.2.42. AT+MSLP
 Function: Set power save mode (Wi-Fi wake up and deep sleep) parameters;
 Format:
 Set Operation
AT+ MSLP=<mode, mask, timeout><CR>< LF ><CR>< LF >
 Parameters:
 mode, power save mode
 standby: Wi-Fi wakeup mode;
 dslp: Deep Sleep Mode;
 mask (only available at standby mode): Wi-Fi wake up condition.
This is multiple-choice option, “1111” mean slect all wake up condition.
 0001: broadcast;
 0010: unicast;
 0100: mac event;
 1000: multicast;
 timeout: timer wakeup parameters, after this time, module will wake up.
Unit: second.
 0: wake up trigger no related to timer;
 >1s:
5.2.2.43. AT+WRMID
 Function: Set module ID;
 Format: