User Manual

HF-LPB200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 50 -
 OPEN
 WPA2PSK
 Encry: include
 NONE: When “auth=OPEN” available;
 AES: When “auth=WPA2PSK” available;
 key: security code, ASCII code, smaller than 64bit and bigger than 8 bit;
5.2.2.34. AT+WAMAC
 Function: Query AP MAC address parameters;
 Format:
 Query Operation
AT+WAMAC<CR>
+ok=<mac_address><CR>< LF ><CR>< LF >
 Parameters:
 mac_address：AP‟s MAC address;
Note: Module AP mode‟s MAC address is related to STA mode‟s MAC address. If user need
changeto others, please contact with high-flying technical people.
5.2.2.35. AT+WADHCP
 Function: Set/Query AP DHCP server status;
 Format:
 Query Operation
AT+WADHCP<CR>
+ok=<status><CR>< LF ><CR>< LF >
 Set Operation
AT+ WADHCP=<status><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 status：AP’s DHCP server function status:
 on：DHCP Server Open;
 off：DHCP Server Close:
5.2.2.36. AT+WADMN
 Function: Set/Query AP webpage domain name;
 Format:
 Query Operation
AT+WADMN<CR>
+ok=<domain_name><CR>< LF ><CR>< LF >
 Set Operation
AT+ WADMN =<domain_name><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 Domain_name: Webpage domain name (within 20 characters, can‟t all numbers).