User Manual

HF-LPB200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 49 -
 Parameters:
 address: STA‟s DNS server address; Effective right away.
5.2.2.31. AT+ LANN
 Function: Set/Query AP‟s network parameters;
 Format:
 Query Operation
AT+LANN<CR>
+ok=<ipaddress,mask><CR>< LF ><CR>< LF >
 Set Operation
AT+ LANN=< ipaddress,mask><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 ipaddress: AP‟s IP address;
 mask: AP‟s net mask;
5.2.2.32. AT+WAP
 Function: Set/Query AP Wi-Fi parameters;
 Format:
 Query Operation
AT+WAP<CR>
+ok=<wifi_mode,ssid,channel><CR>< LF ><CR>< LF >
 Set Operation
AT+ WAP =<wifi_mode,ssid,channel><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 wifi_mode: Wi-Fi mode, include:
 11BGN (Default Value)
 ssid：SSID at AP mode
 channel: Wi-Fi channel selection:
 AUTO
 CH1~CH11; (Default CH1)
5.2.2.33. AT+WAKEY
 Function: Set/Query AP Wi-Fi secruity parameters；
 Format:
 Query Operation
AT+WAKEY<CR>
+ok=<auth,key><CR>< LF ><CR>< LF >
 Set Operation
AT+ WAKEY=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 auth: include