User Manual

HF-LPB200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 33 -
User can access http://10.10.100.254 to set again, and user name and password is “admin”. HF-
LPB200 will restore to AP mode for factory default setting.
Figure 25. Restore Page
4.2. HF-LPB200 Usage Introduction
4.2.1. Software Debug Tools
High-Flying use two common software tools debugging and applying HF-LPB200 module.
(User can also select other tools used to debug serial port).
 Serial Debugging Software: ComTools
 Ethernet Debugging Software: TCPUDPDbg
4.2.2. Network Connection
User can select two methods to connect HF-LPB200 module base on dedicated application.
 Use HF-LPB200 STA interface. HF-LPB200 and debug PC2 connect to a wireless AP,
another PC1 (or user device) connect to HF-LPB200 module with serial port:
Figure 26. STA Interface Debug Connection
 Use HF-LPB200 AP interface. Debug PC2 connect to HF-LPB200 through wireless
connection, another PC1 (or user device) connect to HF-LPB200 module with serial port.