User Manual

HF-LPB200 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 28 -
4. OPERATION GUIDELINE
4.1. Configuration via Web Accessing
When first use HF-LPB200 modules, user may need some configuration. User can connect to HF-
LPB200 module‟s wireless interface with following default setting information and configure the module
through laptop.
Table 8 HF-LPB200 Web Access Default Setting
Parameters
Default Setting
SSID
HF-LPB200
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
User Name
Admin
Password
Admin
4.1.1. Open Web Management Interface
Step 1: Connect laptop to SSID HF-LPB200of HF-LPB200 module via wireless LAN card;
Step 2: After wireless connection OK. Open Wen browser and access “http://10.10.100.254”;
Step 3: Then input user name and password in the page as following and click OK button.
Figure 16. Open Web Management page
The HF-LPB200 web management page support English and Chinese language. User can select
language environment at the top right corner and click “Apply button.
The main menu include nine pages: “System”, “Work Mode”, “STA Setting”, “AP Setting”, Other
Setting”, “Account”, “Upgrade SW”, “Restart”, “Restore”.
4.1.2. System Page
At this page, user can check current device‟s important information and status such as: device ID
(MID), software version, wireless work mode and related Wi-Fi parameters.