User's Manual

HF-LPB Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 32 -
User can access http://10.10.100.254
to set again, and user name and password is “admin”. HF-LPB
will restore to AP mode for factory default setting.
Figure 24. Restore Page
3.2. HF-LPB Usage Introduction
3.2.1. Software Debug Tools
High-Flying use two common software tools debugging and applying HF-LPB module.
(User can also select other tools used to debug serial port).
Serial Debugging Software: ComTools
Ethernet Debugging Software: TCPUDPDbg
3.2.2. Network Connection
User can select two methods to connect HF-LPB module base on dedicated application.
¾ Use HF-LPB STA interface. HF-LPB and debug PC2 connect to a wireless AP, another
PC1 (or user device) connect to HF-LPB module with serial port:
Figure 25. STA Interface Debug Connection
¾ Use HF-LPB AP interface. Debug PC2 connect to HF-LPB through wireless connection,
another PC1 (or user device) connect to HF-LPB module with serial port.