User's Manual

DTU-H100 Wi-Fi/Ethernet to RS485/RS232 Server User Manual

http://www.iotworkshop.com - 65 -

 Query Operation

AT+HTPMODE<CR>

+ok=<type><CR>< LF ><CR>< LF >

 Set Operation

AT+HTPMODE=<type><CR>

+ok<CR>< LF ><CR>< LF >

 Parameters:

 type: HTTP format,

 new: new HTTP format mode.(default mode)

 old: old HTTP format mode.(Reserved)

5.2.2.61. AT+HTPHEAD

 Function: Query/Set device new http format header, it is valid only in httpdclient mode,

setting is valid after reboot.(Reserved)

 Format:

 Query Operation

AT+HTPHEAD<CR>

+ok=<head><CR>< LF ><CR>< LF >

 Set Operation

AT+HTPHEAD=<head><CR>

+ok<CR>< LF ><CR>< LF >

 Parameters:

 head: new HTTP format packet content, if there exist <CR><LF> characters in the

content, replace it with "<<CRLF>>", when set the content in webpage, does not

need to consider this,1~200 bytes length, default is "Content-

type:text/html;charset=utf-8"

5.2.2.62. AT+FASWD

 Function: Query/Set device find password

 Format:

 Query Operation

AT+FASWD<CR>

+ok=<password><CR>< LF ><CR>< LF >

 Set Operation

AT+FASWD=<password><CR>

+ok<CR>< LF ><CR>< LF >

 Parameters:

 password: scan password, 1~100 length, the default is "HF-A11ASSISTHREAD" if

blank value.