User's Manual

DTU-H100 Wi-Fi/Ethernet to RS485/RS232 Server User Manual
http://www.iotworkshop.com - 63 -
+ok=<address><CR><LF><CR><LF>
 Set Operation
AT+ WMAC=<address><CR>
+ok<CR><LF><CR><LF>
 Parameters:
 address: device MAC address in AP mode.
The device‟s STA MAC address is AP‟s MAC address plus 1. For example, AP address:
ACCF23208888, then STA address: ACCF23208889.
5.2.2.54. AT+PING
 Function: PING command;
 Format:
 Set Operation
AT+ PING=<address><CR>
+ok=<status><CR><LF><CR><LF>
 Parameters:
 address: target IP address.
 Status:command result.
5.2.2.55. AT+HTPSV/AT+HTTPURL
 Function: Query/Set device http address and port, it is valid only in httpdclient mode,
setting is valid after reboot
 Format:
 Query Operation
AT+HTPSV/AT+HTTPURL<CR>
+ok=<IP,Port><CR>< LF ><CR>< LF >
 Set Operation
AT+HTPSV/AT+HTTPURL=<IP,Port><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 IP: HTTP server address or domain name, default is 10.10.100.200
 Port: HTTP server port, default is 80.
5.2.2.56. AT+HTPTP/AT+HTTPTP
 Function: Query/Set device http request type, it is valid only in httpdclient mode, setting
is valid after reboot
 Format:
 Query Operation
AT+HTPTP/AT+HTTPTP<CR>
+ok=<Type><CR>< LF ><CR>< LF >
 Set Operation
AT+HTPTP/AT+HTTPTP=<Type><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters: