User's Manual

DTU-H100 Wi-Fi/Ethernet to RS485/RS232 Server User Manual
http://www.iotworkshop.com - 60 -
 Set Operation
AT+ EPHY=<CR>
+ok<CR>< LF ><CR>< LF >
Ethenet port function is disabled bydefault. Input this command to enable Ethenet. This command
is not saved, this means after the device reset, Ethenet is disabled by default. Input “AT+FEPHY=on"
to enable Ethenet forever..
5.2.2.42. AT+STTC
 Function: Enable/Disable STA port scan function;
 Format:
 Query Operation
AT+ STTC<CR>
+ok=<sta><CR>< LF ><CR>< LF >
 Set Operation
AT+ STTC=<on/off><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 sta: when query, this value feedback
 On: Enable STA port scan function;
 Off: Disable STA port scan function;
5.2.2.43. AT+DOMAIN
 Function: Set/Query domain ofdevice webpage;
 Format:
 Query Operation
AT+ DOMAIN<CR>
+ok=<domain><CR>< LF ><CR>< LF >
 Set Operation
AT+ DOMAIN=<domain><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 domain: domain to acess to device webpage.
5.2.2.44. AT+FRLDEN
 Function: Enable/Disable nReload pin function;
 Format:
 Query Operation
AT+ FRLDEN<CR>
+ok=< on/off ><CR>< LF ><CR>< LF >
 Set Operation
AT+ FRLDEN=<on/off><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 on/off: Enable or Disable nReload pin function.